基于NCL30001和NCS1002的高達28 V、3.3 A恒流離線高功率因數LED驅動器設計筆記

This Design Note (DN) is an extension to ON Semiconductor’s Application Note AND8427/D and illustrates how the NCL30001 continuous conduction mode power factor corrected single stage flyback controller can be used to implement a constant current LED driver for area lighting applications such as high bay, tunnel, parking garage and roadway lighting.This specific design has been optimized for LEDs that require greater than 3A drive capability such as the Luminus Devices CSM360 and SST90. This design can support up to 8 SST90 devices in series or 2 CSM360. The CSM360 LED has a nominal forward voltage of 12.8 V at a drive current of 3.2A and depending on the color temperature and flux bin can generate 1600-3900 lumens.
采購指南
更多>>特別推薦
- 重磅公告!意法半導體2025年Q2業績發布及電話會議時間確定
- 1700V耐壓破局!Wolfspeed MOSFET重塑輔助電源三大矛盾
- 西南科技盛宴啟幕!第十三屆西部電博會7月9日蓉城集結
- 硬件加速+安全加密:三合一MCU如何簡化電機系統設計
- 智能家電的“動力心臟”:專用電機控制MCU技術全景解析
- 溫漂±5ppm的硬核科技:車規薄膜電阻在衛星與6G中的關鍵作用
- 納秒級時間敏感網絡!貿澤攜手ADI 開售納秒級工業以太網交換機
技術文章更多>>
- 電感傳感破局線控技術系統!汽車機械架構的數字化革命
- 西南科技盛宴啟幕!第十三屆西部電博會7月9日蓉城集結
- 帶寬可調+毫米波集成:緊湊型濾波器技術全景解析
- 從誤報到精準預警:多光譜MCU重構煙霧探測邊界
- 溫漂±5ppm的硬核科技:車規薄膜電阻在衛星與6G中的關鍵作用
技術白皮書下載更多>>
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall
熱門搜索